Giltrap Feed Mixer Dual Auger 2802
Features
| Model | 2802 |
|---|---|
| Height | 3.12m |
| Width | 2.77m |
| Length | 8.36m |
| Door width | 1.47m |
| Weight | 9693kg |
| Capacity | 27.3m3 |
| Capacity with ext. | 31.7m3 |
| PTO speed | 1000 rpm |
| Min. power | 112 kW |
| Knife type | Carbide inserts |
| No. of knives | 18 |
| No. of wheels | 8 |
| Wheel Type | |
| Feed discharge | Front door |
| Main drive type | PTO |
| Wide angle PTO shaft | Yes |
| Scales | Yes |
Overview
Amazing! That is the only way to describe the performance of the NDE dual vertical feed mixer with the patented Step Floor design!
With the front floor 250mm lower than the rear and a 300mm overlap of the auger pattern it is not hard to see why these mixers outmix, outcut and cleanout better than any other twin auger mixer ever built! By adopting this simple design we have created a "flow pattern" that is always moving the feed to the front of the mixer. This concept allows the auger to work together instead of competing with each other like conventional twin auger mixer. If you are still not convinced, just ask someone that owns one!
Standard Features
- Front opening door
- Largest single auger available
- No corners means no dead spots, less stress and less wear and tear
- 90% less moving parts than other ordinary mixers
- Easy to use and easy to maintain - super reliable
- It has the largest and sharpest cutting blades of any mixer. The patented blades with tungsten inserts are as good as new even after 1500 hours!
- The best self-cleaning auger shoe on any mixer. The shoe cleans itself like a lug on a tractor tyre
- Digital scales offering precise easy-to-read information
- Built in an ISO 9002 certified factory for quality manufacturing
- 2 speed gearbox
- Ladder/platform
Options
- Hydraulic jack
- Side door
- Rear door
- Hard surface auger
- Wind guard for side conveyor
- Feed discharge magnet
- Remote scale readout
- 2 speed gearbox
- Feed slide extension
- Rubber tub extension
- Longer side conveyor
- Light kit
| Invercargill | Gore | Mosgiel | Cromwell |
|---|---|---|---|
|
93 North Road Phone: 03 215 9132 A/H: Alister: 027 686 8454 A/H: Pete S: 027 434 5209 A/H: Pete L: 027 433 1492 A/H: Brent: 021 723 360 |
12 Charlton Lane Phone: 03 208 8203 A/H: Andy: 027 695 5451 A/H: Michael: 027 433 4123 A/H: Anthony: 027 209 7343 |
13 McGlashan Street Phone: 03 489 0472 A/H: Scott: 027 588 3488 A/H: Barry: 027 486 6433 A/H: Mark: 027 435 8306 |
12 Elspeth Street Phone: 03 445 1046 A/H: Murray: 027 807 4032 A/H: Bruce H: 027 241 0110 A/H: Bruce C: 027 434 0431 |
Website: www.sfml.co.nz | |||