Net on and Bale Ejected in Just 6 seconds.
John Deere’s 900 Series variable chamber round balers feature a revolutionary Fast Release System (FRS), which can lead to savings of up to an hour a day during harvest. These unique balers are currently in stock now at Southland Farm Machinery.
Designed specifically for use by contractors and large livestock farms, the 960 and 990 balers employ state-of-the-art technology to significantly improve baler output, bale density and operator comfort. In addition, built-in reliability and durability are provided by the exclusive full-frame design, which relieves the entire bale chamber from external stress.
FRS speeds up the bale ejection process by enabling the operator to unload the completed bale in less than five seconds, which is up to 10 seconds faster than a conventional machine. It employs a unique ‘curtain’ design, which replaces the traditional heavy rear door.
As a further aid to increased productivity and efficiency, innovative side panels have replaced the usual bale chamber side walls. During bale formation, these flexible panels ensure that the baler reaches maximum capacity, and also open slightly as the bale is ejected, to prevent any risk of the bale jamming in the chamber.
The 960 and 990 balers are available with a choice of 2.2 m wide RotoFlow or MaxiCut™ 13 or 25-knife precutter pick-ups, and produce bale diameters from 0.8 to 1.6 m and 0.8 to 1.85 m respectively. For improved crop flow and enhanced reliability, the newly designed high capacity pick-up uses five rows of tynes instead of the four on traditional models. The balers are also equipped with a new drop-floor unplugging system, which operates over the total width of the rotor.
The net wrapping system is now located at the front of the baler to allow continuous visual control of the wrapping process. The net is pulled directly into the bale chamber and plugging is therefore avoided, whatever type of net (CoverEdge™ or XtraNet) or net length is being used.
To further improve efficiency, especially during long working days, the 900 Series balers are ISOBUS certified and come equipped with a GreenStar™ 1800 display. This controls most of the key machine settings and functions, including bale density and size, soft core pressure and diameter, knife selection and operation of the drop-floor unplugging system.
For further information on John Deere 900 Series Balers or to arrange an on farm demo contact Pete Leonard at Southland Farm Machinery today.
93 North Road
Phone: 03 215 9132
A/H: Alister: 027 686 8454
A/H: Pete S: 027 434 5209
A/H: Pete L: 027 433 1492
A/H: Brent: 021 723 360
12 Charlton Lane|
Phone: 03 208 8203
A/H: Andy: 027 695 5451
A/H: Michael: 027 433 4123
A/H: Anthony: 027 209 7343
13 McGlashan Street|
Phone: 03 489 0472
A/H: Scott: 027 588 3488
A/H: Barry: 027 486 6433
12 Elspeth Street|
Phone: 03 445 1046
A/H: Bruce H: 027 241 0110